I/O ports and slots:
-48 RJ-45 autosensing 10/100/1000 BASE-T (PoE+ ports); Duplex: Ports 1-48 support
10BASE-T/100BASE-TX, 1000BASE-T (full only); Ports 41-48 support MACsec
-4 SFP+ 10GbE ports;
-1 port expansion module slot
10BASE-T/100BASE-TX, 1000BASE-T (full only); Ports 41-48 support MACsec
-4 SFP+ 10GbE ports;
-1 port expansion module slot
Additional ports and slots:
-1 dual-personality (RJ-45 or mini USB) serial console port
-1 RJ-45 out-of-band management port
-1 USB 2.0
-1 RJ-45 out-of-band management port
-1 USB 2.0
Power supplies:
-2 power supply slots
-1 minimum power supply required
-1 minimum power supply required
Fan tray:
-Airflow direction is Side to Back and Back to Side
Memory and processor:
-2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash
Mounting and enclosure:
-Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
1000 Mb Latency: < 5 μs
10 Gbps Latency: < 3 μs
Throughput: Up to 180 Mpps
Routing/Switching capacity: 336 Gbps
Routing table size: 32768 entries (IPv4), 16384 entries (IPv6)
MAC address table size: Up to 64K, recommended 32K
Frequency: 50/60 Hz
Maximum heat dissipation:
Ranges from 112 BTU/hr to 5943 BTU/hr depending on power supply configuration
Ranges from 112 BTU/hr to 5943 BTU/hr depending on power supply configuration
Voltage:
90 VAC to 264 VAC
-36 VDC to -72 VDC
-36 VDC to -72 VDC
Current: 3A
Maximum power rating: 1110 W
Idle power: 33 W
PoE power: 1440 W PoE+
Listing includes 1x R8M29A switch, 2x JG545A power supplies.