E-100BTX-FX-05-NA I New Transition Networks Stand-Alone Fast Ethernet ST Convert
E-100BTX-FX-05-NA I New Transition Networks Stand-Alone Fast Ethernet ST Convert
E-100BTX-FX-05-NA I New Transition Networks Stand-Alone Fast Ethernet ST Convert
E-100BTX-FX-05-NA I New Transition Networks Stand-Alone Fast Ethernet ST Convert

E-100BTX-FX-05-NA I New Transition Networks Stand-Alone Fast Ethernet ST Convert

Regular price
$140.00
Sale price
$140.00
Shipping calculated at checkout.

Extend Network Distance: Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber or up to 80 km over single mode fiber.Connect Remote Devices: Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.The converters will automatically re-establish link when connected to two 10/100 auto-negotiating switches, after the fault condition has been corrected. With other manufacturers’ converters the user must intervene to re-establish link.

E-100BTX-FX-05-NA: 100Base-TX (RJ-45) [100 m/328 ft.]to 100Base-FX 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB 

Features:

-Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan
-Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times
-Auto-Negotiation
-Auto-MDI/MDIX
-Active Link Pass Through
-Far-End-Fault (FEF)
-Pause
-Automatic Link Restoration

Power supply IS included per manufacturer spec.

The Transition Networks E-100BTX-FX-05-NA is optimal for extending network distance.  Installed in pairs, the E-100BTX-FX-05-NA media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber or up to 80 km over single mode.  The E-100BTX-FX-05-NA is also used to fiber connect remote devices. Using one E-100BTX-FX-05-NA media converter, a switch with a copper port can be connected to a switch with an existing fiber interface. The converters will automatically re-establish link when connected to two 10/100 auto-negotiating switches, after the fault condition has been corrected. With other manufacturers’ converters, the user must manually re-establish the link.

 

The Transition Networks E-100BTX-FX-05-NA is the US model in this line and includes a power supply for immediate installation.  This converter operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan.  The E-100BTX-FX-05-NA includes 100Base-TX (RJ-45) [100 m/328 ft.]to 100Base-FX 1300nm multimode (ST) [2 km/1.2 mi.] conversion.  The link budget is 11.0 dB.